
High power, High(83kHz) frequency Locating.
For general-purpose pipe locating.
The PL-960 offers a high power, high frequency locating. With 3 active
frequencies, 27kHz, 83kHz, and 334kHz, The higher frequencies are good
for shorter pipes, Occationally, high frequency jumps non-conductive insulators
and gaskets.
Pull up depth measurement increases the reliability of the depth measurement.
The PL-960 is powerful and versatile. Can trace and locate any continuous
metal such as iron, steel, and copper water lines, gas lines, tracer wire
by plastic pipe, telephone/TV cables, copper and aluminum wire, conduit
and power lines. Max depth 5m. Runs on 6D cell batteries - Transmitter
and 6 AA batteries - Receiver. Comes with Padded Case Transmitter, Receiver,
manual and Conductive Clips
 |
Download
Now!
 |
 |
Discover high-power, Low-frequency Locating
Especially for long distance cable applications.
The PL-2000 offers a new approagch in high power, low frequency location.
With 3 active frequencies, 0.5kHz, 8kHz, and 27kHz and 2 Passibe frequencies,
50/60Hz, as a Live Cable detection mode and both inductive and direct connection
capabilities, the PL-2000 is powerful and versatile. Can trace and locate
any continuous metal such as iron, steel, and copper water lines, gas lines,
tracer wire by plastic pipe, telephone/TV cables, copper and aluminum wire,
conduit and power lines. Max depth 5m. Runs on 6D cell batteries - Transmitter
and 6 AA batteries - Receiver. Comes with Padded Case Transmitter, Receiver,
manual and Conductive Clips.
PL-2000 can also locate a power live cable without the transmitter using
Passive 50/60 mode..
Push button depth measurement.
What is the PL-2000? |
Download
Now!
 |
 |
The NPL-100 non-metallic
pipe locator had the automatic adjustment function for tuning
in a resonance frequency of each pipe.
Because of the unique principle, the NPL-100 can locate not
only the non-metallic pipes but also the metallic pipes including
the metallic pipes with insulating joints.
|
Download
Now! |
|