Fuji PL-960 Pipe and Cable locator has been developed by use of the most reliable performance differential pick-up coil which has been fully testified by the facts experienced with Fuji PL-801 since 1980.
The PL-960 offers a high power, high frequency locating. With 3 active frequencies, 27kHz, 83kHz, and 334kHz.
Occasionally, high frequency jumps non-conductive insulators and gaskets. Pull up depth measurement increases the reliability of the depth measurement.
The PL-960 is powerful and versatile. Can trace and locate any continuous metal such as iron, steel, and copper water lines, gas lines, tracer wire by plastic pipe, telephone/TV cables, copper and aluminum wire, conduit and power lines.
Max depth 5m. Runs on 6D cell batteries-Transmitter and 6 AA batteries-Receiver. Comes with Padded Case Transmitter, Receiver, manual and Conductive Clips.
The PL-2000 offers a new approach in high power, low frequency location. With 3 active frequencies, 0.5kHz, 8kHz, and 27kHz and 2 passive frequencies, 50/60Hz, as a Live Cable detection mode and both inductive and direct connection capabilities, the PL-2000 is powerful and versatile.
Can trace and locate any continuous metal such as iron, steel, and copper water lines, gas lines, tracer wire by plastic pipe, telephone/TV cables, copper and aluminum wire, conduit and power lines.
Max depth 5m. Runs on 6D cell batteries-Transmitter and 6 AA batteries-Receiver. Comes with Padded Case Transmitter, Receiver, manual and Conductive Clips.
PL-2000 can also locate a power live cable without the transmitter using Passive 50/60 mode. Push button depth measurement.
The NPL-100 is a sophisticated instrument for locating non-metallic water pipelines.
Using a vibrator attached to the outlet of a fire hydrant or to pipe fittings, the NPL-100 sends a sound wave through the water in the pipe.
This sound wave is detected by the NPL-100's sensitive ground microphone (receiver), permitting accurate tracking of the pipeline. The vibrator's signal intensity and frequency can be remotely controlled from the receiver to find the optimum resonance of the pipeline.
NPL-100 has the automatic adjustment function for tuning in a resonance frequency of each pipe.
